This files contains 4 devices:

• - STEM 247 (24 channels to 7 bus)
• - M16 (16 mono channels)
• - 4S4H (8 mono channels)
• - MB7 (Master Bus)

DEMO LIMITATIONS:
=================
- silence every x seconds
- no access to additional Panels (CCNUM/SCENES)
- only 4 devices.
- You can assign CC numbers, but expect inconsistencies in the outputted levels and other limitations. Cannot be used for production or to test production results if you assign Midi CC to bus sends.
- It's version 1.0, release is currently v 1.04.

INSTALLATION
============
- Unzip the files and copy them to your Demo directory
( for example :C:\Scope\Devices\Demos\ )

- load the devices in your project and begin connecting.

→ Click to watch a video  about connecting demo modules together

TIP: To enjoy less silences, do the following

1. Load one of the demo module and open its surface
2. As soon as the "demo" panel shows, load next module in the project
3. Do the same for each module of the demo pack.

========================

DSP values given for a Scope Pro - built 1999

1. Less than 9 DSP with 2 masterverb-pro and an Echo 35 = 5 DSP left for Eqs, dynamics, sidechains (Animation 1)
2. - Around 5 DSP without effects (picture 2)

No Fx (5 dsp):